Home Download Ubuntu

Command lines for Verlihub as Admin

1. Common settings:

To get the current configuration settings type:

!getconfig


To change a setting to a new value type:

!set


Once changes are made, you will need to refresh the hub. (Some changes will require you to stop and start the hub again, however.)

!reload


Configured with install script
Variable Explanation
listen_portThe port the hub listens on. Other hubs use port 411, but you need to run verlihub as root to do that. Default: 4111.
hub_hostWhat people will use to connect to your hub. (An example: myhub.no-ip.com)
hub_nameThe name of your hub
Not configured - you may need to configure these
Variable Explanation
listen_ipIf you have more than one network card in your PC, enter the IP address to listen on. If you don't have more than one network card, no change is necessary. Default: (empty)
hub_descA description of your hub.
hub_categoryAn upcoming extension to the hublist protocol this variable allows you to specify what type of hub you have i.e. movies
hub_ownerOwner that runs the hub.
min_nickMinimum nickname length. Default: 3.
max_nickMaximum nickname length. Default: 32.
max_usersMaximum number of users allowed in your hub. Default: 6000
min_shareMinimum amount that people must share in your hub in megabytes. People that share less will not be allowed to join. Default: 2 GB (2048).
tban_kickLength of time people must wait after being kicked to rejoin. In seconds. Default: 300 seconds. (5 minutes)
send_user_infoWhen people join, the hub will send them information about themselves. Set to 0 (zero) to disable, or 1 to enable. Default: 1.
send_user_ipWhen people join, the hub will send them the IP address they are reporting. Set to 0 (zero) to disable, or 1 to enable. Default: 0.
hub_securityThis is the name of the Hub Security bot.
hub_security_descThis is the description of the Hub Security bot.
opchat_nameThis is the name of the OpChat bot.
opchat_descThis is the description of the OpChat bot.


Let's say we want to change our hub's name:

!set hub_name UbuntuHub


2. Message of the day:

The message of the day will be shown to every member joining the hub

FileDescription
motdAll users receive this motd
motd_regRegistered users receive this in addition to motd.
motd_vipVIP Users receive this in addition to motd_reg and the normal motd.
motd_opOPs receive this in addition to motd_vip, motd_reg and the normal motd.
motd_cheefCheef OPs receive this in addition to motd_op, motd_vip, motd_reg and the normal motd.
motd_adminAdmin OPs receive this in addition to motd_cheef, motd_op, motd_vip, motd_reg and the normal motd.
motd_masterMaster users see all motd messages.


3. Listening on more than one port:

!set extra_listen_ports 400 8888 666


Resources: Verlihub :: Configuring Your Hub

0 comments:

Post a Comment